How to deal with the abnormal conditions of the oil mist collector? Oil mist collector: one of the potential safety hazards of the oil mist purifier is that the oil accumulation of its rear filter is serious, which may be that the rear filter does not work and needs to be cleaned or replaced immediately; It may also be due to the excessive carbon content of oil mist and water vapor in the workplace, so that the filter in front of it can not be filtered in time and thoroughly; Of course, it does not rule out the fact that the previous filter does not work.
In case of such problems, the rear filter of the oil mist purifier needs to be disassembled, cleaned or replaced; Mutually limit the content of oil particles and water vapor in gas; It is also necessary to carefully check the condition of the filter and timely clean or replace the failed parts.
The second abnormal condition of the oil mist purifier is the excessive oil accumulation at the bottom of the box. There are two reasons for the problem: on the one hand, the oil accumulation at the bottom of the box has not been eliminated in time; On the other hand, the lower oil port of the oil mist purifier has been blocked and it is impossible to discharge the accumulated oil at the bottom of the tank.
This also reminds us to clean the oil mist purifier regularly and discharge the accumulated oil at the bottom of the purifier box; Check the lower oil port and repair or replace it in time if there is any problem to ensure its normal operation and avoid more serious consequences caused by blockage.
The third abnormal condition of the oil mist purifier is the serious accumulation of oil fume and water vapor on the inner wall. In addition to the unsmooth surface of the inner wall, it is also possible that the oil mist and water vapor are easy to condense on the inner wall due to the high content of fine impurities in the gas. The treatment is very simple. It is not only necessary to make the inner wall of the oil mist purifier as smooth as possible, but also need to shut down and clean the inner wall of the machine every quarter.
